Product Categories
Social Media
Home > News > Content
Solid Tire Representation
- Sep 30, 2018 -

The current solid tires are divided into two series: pneumatic tire rim type solid tire and steel ring pressure matching solid tire. Pneumatic tire rim solid tires are solid tires that can be used interchangeably with pneumatic tires of the same specification. A steel ring press-fit solid tire is a solid tire that is bonded to a steel ring by a press and pressed into a hub by a press. Next, the solid tire manufacturers will introduce the representation of these two solid tire specifications:


1. The specification of the pneumatic tire rim type solid tire is as follows:


A.7.00-12/5.0 7.00--The nominal section width of the tire (inches) 12--the nominal diameter of the rim (inches) 5.0--the nominal width of the rim (inches);


B.300-15/8.0 300-- nominal section width (mm) of the tire x 15--nominal diameter of the rim (inches) 8.0-- nominal width of the rim (inches);


C.28x9-15/8.0 28--The nominal outer diameter of the tire (inches) 9--the nominal section width of the tire 15--nominal diameter of the rim (inches) 8.0--the nominal width of the rim (inches);


D.355/65-15/9.75 355--Nominal section width of the tire (mm) 65--Nominal section aspect ratio (%) of the tire 15--Round nominal diameter (inches) 9.75--Roll nominal width (inches).


2. The representation method of the steel ring press-fit solid tire is as follows:


A.21x7x15 21--the nominal outer diameter of the tire (inches) 7--the nominal width of the tire (inches) 15-the nominal inner diameter of the tire (inches);


B.533x178x381 533--the nominal outer diameter of the tire (mm) 178--the nominal width of the tire (mm) 381--the nominal inner diameter of the tire (mm).


Previous: No Information